> Product > Steel Chopper
Cast Steel Integrated Precision Round Bar Cutting Machine
JCP HS series
JCP-450HS / 650HS / 800HS
JCP HS series is a cutting press for round bar cutting for hot and hot forging. It is made of an H-type cast steel integrated frame to increase the shock and vibration absorption during cutting to realize the complete durability of the frame. Adopted, it is possible to produce high-quality billets with high precision at right angles and less cutting deformation through various options.
Feature
The entire frame is made of all-in-one cast steel, which increases frame rigidity and absorbs shock when cutting, resulting in less vibration and perfect frame durability.
Circular Plunger Slide guide
Adoption of a circular plunger slide guide prevents single wear when cutting, and guide adjustment is unnecessary (patent pending)
Numerical control automatic control system
Numerical control enables automatic adjustment of specifications and lengths and operator confirmation on the cutting gap determination panel
Attached to the system that can handle the first and last remnants
Wet Clutch Brake
High-efficiency, energy-saving wet clutch brake with power transmission suitable for nose torque press
Minimal noise and vibration and almost no lining wear by using cooling system
Material transfer clutch
It reduces the wear by roller slip and enables more forceful and accurate material transfer. It uses a self-made clutch device and increases durability and life.
Q.D.C System / Double-slide Wedge Clamp
Q.D.C system and double-sided wedge clamp method improves the cut surface of the product by 50% (patent pending)
3-Way Suit
The chute where the cut material directly hits is installed with a steel plate liner of high hardness to protect the damage and to apply the 3-Way Chute so that the cut material can be continuously loaded into the pallet without stopping the machine (Patent 10-1395062)
Video
Specification
| CLASSIFICATION | CAPACITY(Ton) | S.P.M | STROKE LENGTH(mm) | MAIN MOTOR(Kw) | FEEDING SPEED(m/min) | FEEDING MOTOR(PINCH ROLLER)(Kw) | STANDARD CUTTING LENGTH(mm) | MATERIAL/Tension(Kgf/mm2) | S45C/60 | S55C/70 | SMn443/80 | SCR435/90 | SCM440(SCM4)/100 | CUTTING NO/M |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| JCP-450HS | 450 | 45 | 120 | 37 | 10~40 | 3.7 | 55~350 | Max. | Con. | 92 | 70 | 86 | 65 | 80 | 61 | 76 | 57 | 72 | 54 | 14 | Con. |
| JCP-650HS | 650 | 40 | 130 | 55 | 10~40 | 3.7 | 65~350 | Max. | Con. | 110 | 84 | 103 | 78 | 96 | 73 | 91 | 69 | 86 | 65 | 12 | Con. |
| JCP-800HS | 800 | 40 | 140 | 75 | 10~40 | 3.7 | 65~450 | Max. | Con. | 124 | 93 | 114 | 86 | 107 | 81 | 101 | 76 | 96 | 72 | 10 | Con. |
